74
Digital Dial Readout
Digital Dial Readout causes your phone to vocally playback phone
number digits as you enter them.
䊳
From the
SOUNDS SETTINGS
menu, select
Digital Dial
Readout
➔
On
to enable Digital Dial Readout.
Service Alerts
Service Alerts lets you enable playback of the alert tone when
you Roam or loose Service, for each minute a phone call lasts,
each time a Call Connects.
䊳
From the
SOUNDS SETTINGS
menu, select
Service Alerts
,
then select any of the following to enable a service alert
tone occurrence:
• Roam/SVC Alert
➔
On
.
• Minute Beep
➔
On
.
• Call Connect
➔
On
.
Power On
Power On lets you choose whether your phone plays a melody
when you power it on. Select On to play the melody, and select
Off to disable the melody.
䊳
From the
SOUNDS SETTINGS
menu, select
Power On
.
Call Settings
The Call Settings sub-menu lets you set call options such as Auto
Retry, Data rates for data calls, and more.
䊳
From the
SETTINGS
menu, select
Call Settings
. The
CALL
SETTINGS
menu appears in the display.
Answer Options
You can set your phone to answer incoming calls only when:
•
You press
Send
, or
•
You press any key on the keypad except
End
, or
Volume
.
䊳
From the
CALL SETTINGS
menu, select
Answer Options
.
Auto Answer
Auto Answer
lets you set your phone to automatically answer
calls after 1, 3, or 5 seconds.
䊳
From the
CALL SETTINGS
menu, select
Auto Answer
.
Auto Retry
Auto Retry
automatically re-dials a number at an interval you
select, when there is no answer or the dialed party is busy.
Depending upon your location, the number of times your phone
re-dials a number may vary.
䊳
From the
CALL SETTINGS
menu, select
Auto Retry
.
To Next Page
Loading...
