44
Editing a Contacts Entry
1. In the
CONTACTS LIST
screen, enter the first few characters
of a Contact’s name in the
Go To
field or scroll down to a
Contact.
2. Highlight the desired
Contact
and press
VIEW
. The VIEW
CONTACT screen appears in the display showing the
highlighted
Contact
’s information.
3. Press EDIT. The EDIT CONTACT screen appears in the
display.
4. Highlight the particular information you want to enter or
change.
•
To backspace and delete numbers or letters, press .
•
To clear all numbers or letters in the highlighted field, press and
hold .
•
Press
Options
,
the following options appear in the display:
–
Set Speed Dial
/
Remove Speed Dial
: Assign/remove a speed dial
number (For more information, refer to
“Speed Dials”
on page 49).
–
Set as Default
: Set the number the phone will dial when Contacts
dialing, speed dialing, or voice dialing.
–
Add 2-Sec Pause
: A 2-second pause after which dialing resumes.
–
Add Wait
: A hard pause (waits for input from you).
Select the desired option.
5. When you’re finished changing the information for this
Contact, press
SAVE
. Your changes are saved.
Saving a Number After a Call
Once you finish a call, you can store the caller’s number to your
Contacts list.
Note:
If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.
1. Press
End
to end your call. The call time, length of
call, phone number, and name of the party (if available)
appear in the display.
2. Press Save. The Save screen appears in the display
showing the following options:
•
Add New Contact
: Lets you create a new Contacts entry.
•
Update Existing
: Lets you add the number you entered to an
existing Contacts entry.
3. Select the desired option, then follow the instructions in
the upcoming sub-sections depending on whether the
number is a new entry or you are adding it to an existing
entry.
To Next Page
Loading...
