Getting Started 11
TTY Mode
Your phone is fully TTY-compatible, allowing you to connect a
TTY device to the phone’s headset jack. Before you can use
your phone with a TTY device, you’ll need to enable TTY
Mode.
For more information, refer to “Other call settings” on page
43.
Turning Your Phone On
Press and hold the
Power/Lock
key for three
seconds.
While powering on, the phone connects with the
network (both digital and LTE), then displays the
Locked screen and any active Notification alerts.
Note:
Your phone’s internal antenna is located along the
bottom back of the phone. Do not block the antenna;
doing so may affect call quality or cause the phone to
operate at a higher power level than necessary.
To Next Page
Loading...
