Samsung Electronics5-30
Alignment and Adjustment
3. How to get into service ÒADJUSTÓ mode.
1. Connect the power source (battery/DC cable).
2. Set the power switch of the camcorder to
PLAYER position.
3. Press the eject button to eject mode.
STEP 1
1. Press and hold “EJECT” button and “STOP”
button on the Camcorder at the same time
for more than 5 seconds.
2. If the color bar generated internally appears
on the monitor and adjustment mode dis-
played like the figure below, VCR adjust-
ment mode has been successfully activated.
STEP 2
01.CAPSTAN FG
EPR:XX EVR:XX
TV, LCD or EVF monitor
Address of the adjustment mode.
: there are 01 to 1C.(refer 5-32)
Name of the adjustment mode.
: every address have a name
like this (refer 5-32)
Present data
: be adjusted before.
New data
: be adjusted newly.
To Next Page
Loading...
