Samsung Electronics 4-27
Alignment and Adjustment
15. B-Y Positive Hue
1) Camera “E-E”, 3100°K color bar chart.
2) Video(output) jack and register of EEPROM.
3) Connect video(output) jack to vectorscope
input jack and monitor TV jack respectively.
4) Press the “FADE(MODE UP)/BLC(MODE
DOWN)” button so that the OSD state is “14D
XX XX”.
5) Aim the camera at a color bar chart illuminated
at 1500 to 2000 lx.
6) Adjust the “DSE(DATA UP)/TITLE
(DATA DOWN)” button so that the cyan
vector is 284.
7) Be sure to press the “PROGRAM AE (CON-
FIRM)” button to memorize setting.
Note : Bright dot shifts after the confirm button is
pressed.
16. B-Y Negative Hue
1) Camera “E-E”, 3100°K color bar chart.
2) Video(output) jack and register of EEPROM.
3) Connect video(output) jack to vectorscope
input jack and monitor TV jack respectively.
4) Press the “FADE(MODE UP)/BLC(MODE
DOWN)” button so that the OSD state is “14E
XX XX”.
5) Aim the camera at a color bar chart illuminated
at 1500 to 2000 lx.
6) Adjust the “DSE(DATA UP)/TITLE
(DATA DOWN)” button so that the red vector
is 104.
7) Be sure to press the “PROGRAM AE(CON-
FIRM)” button to memorize setting.
Note : Bright dot shifts after the confirm button is
pressed.
To Next Page
Loading...
