Samsung Electronics 4-33
Alignment and Adjustment
2. The following chart shows the function of each button.
Button
BLC(MODE DOWN)
FADE(MODE UP)
DSE(DATA UP)
TITLE(DATA DOWN)
PROGRAM AE(CONFIRM)
Function
When change the adjustment mode.
When change data value of adjust state.
Data store after finishing adjustment by “DATA UP/DATA DOWN” button
ADDRESS MODE NTSC PAL MEAN REMARK
0 USER BRHT 4B 4B BRIGHT ADJUST
1 S SUB R 80 80 R-SUB BRHT FIXED
2 R SUB B 80 80 B-SUB BRHT FIXED
3 CONTRAST 88 88 CONTRAST ADJUST
4 S CONT R 99 99 R-SUB CONT FIXED
5 S CONT B 99 99 B-SUB CONT FIXED
6 GAMMA 2 70 70 GAMMA 2 FIXED
7 GAMMA 1 92 92 GAMMA 1 FIXED
8 ONLY 0 00 00 ONLY 00 FIXED
9 COM DC 7A 7A VCOM ADJUST
A COLOR 80 80 COLOR FIXED
B HUE 80 80 TINT FIXED
C W/B LMT 1B 1B W/B LIMIT FIXED
D FIL/LPF 00 00 FIL/LPF FIXED
E PIC/GAIN 00 00 PICTURE/GAIN FIXED
F MODE/PLL 0C 0C MODE/PLL ADJUST
10 SYNC GEN 00 00 SYNC GEN FIXED
11 Y MIRROR 00 01 NTSC/PAL FIXED
12 OUT INV 00 00 OUT INV FIXED
13 X MIRROR 00 00 UP/DOWN FIXED
14 H POSI 10 10 H-POSITION FIXED
15 HDO OUT 00 00 HDO OUT FIXED
Notes : In service adjustment mode, button names are different from those in customer function control
mode.
3. Adjustment mode table
To Next Page
Loading...
