d
MAIN SETUP
1.LENS DC
䯝 2.EXPOSURE
3.WHITE BAL ATW
EXPOSURE
When the SETUP menu screen is displayed,
select ‘EXPOSURE’ by using the Function
Setup switch so that the arrow indicates
‘EXPOSURE’.
Select a desired mode using the Function
Setup switch.
BRIGHTNESS : Adjusts the video brightness.
SHUTTER : You can select the shutter.
--- : Shutter speed is fi xed at 1/60 sec
(1/50 sec).
ESC : Select this to control the shutter
speed automatically. If ESC is
selected, the shutter speed is
automatically controlled depending on the ambient illumination of
the subject.
MANUAL : You can control shutter speed manually.
(NTSC MODEL - 1/60sec~1/120,000sec, PAL MODEL -
1/50sec~1/120,000sec
)
A.FLK : Select this when you experience picture fl icker, this happen when
there is a clash with the installed lighting frequency.
Set the shutter mode to --- if color rolling occurs.
When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the picture may
become unstable if the camera faces a bright fl uorescent light. Therefore, take care when
choosing the installation position.
When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
AGC (AUTO GAIN CONTROL)
: The higher the gain level, the brighter the screen
- but the greater the noise.
HIGH : Allows automatic gain control from 5.3dB to 37dB.
OFF : Deactivates the AGC function.
LOW : Allows automatic gain control from 5.3dB to 32dB.
SENS-UP
: When it is night or dark, the camera automatically detects the light level
and maintains a clear picture if this mode is activated.
OFF : Deactivates the SENS-UP function.
AUTO : Activates the SENS-UP function.
RETURN
: Select this to save the changes in the EXPOSURE menu and return to
the SETUP menu.
1.
2.
y
y
-
-
-
-
y
-
-
-
y
-
-
y
EXPOSURE SETUP
䯝 1.
BRIGHTNESS
IIIII
Â
IIIIIIIIIIIIIIII
25
2.SHUTTER
---
3.AGC HIGH
4.SENS-UP OFF
5.RETURN
To Next Page
Loading...