22_ setup
setup
White Balance may not work properly under the following conditions. In this case select the AWC
mode.
➊
When the color temperature of the environment surrounding the subject is out of
the control range (e.g. clear sky or sunset).
➋
When the ambient illumination of the subject is dim.
➌
If the camera is directed towards a fl uorescent light or is installed in a
place where illumination changes dramatically, the White Balance
operation may become unstable.
BACKLIGHT
This camera is designed so that it delivers a distinctive subject and background at
the same time, even when the subject is in backlight, unlike conventional cameras, by
adopting a proprietary SV-V DSP chip.
When the SETUP menu screen is displayed,
select ‘BACKLIGHT’ by using the Function
Setup switch so that the arrow indicates
BACKLIGHT .
Select a desired mode using the Function Setup
switch depending on the camera purpose.
USER BLC
: Enables a user to directly
select a desired area from a
picture, and to view the area
more clearly.
LEVEL : Adjust level of the BLC function.
TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
HLC (High Light Compensation) :
This function masks the strong light to
minimize white out due to over exposure and
preserve much of the on-screen details when
the camera aims a strong light source.
LEVEL : Adjusts the brightness level of a
monitoring area.
LIMIT : Enable to change the operating
condition.
1.
2.
y
-
-
y
-
-
M
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
君 4.BACKLIGHT OFF
5.SSNR3 ON
BLC SETUP
君 1.LEVEL
MIDDLE
2.TOP
IIIII
Â
IIIIIIIIIIIIIIII
25
3.BOTTOM
IIIIIIIIIIIIIIIIII
Â
III
90
4.LEFT
IIIIII
Â
IIIIIIIIIIIIIII
55
5. RIGHT
IIIIIIIIIIIIIIII
Â
IIIII
120
6. RETURN
HLC SETUP
君 1. LEVEL
MIDDLE
2. LIMIT
NIGHT ONLY
3. MASK COLOR BLACK
4. MASK TONE
III
Â
IIIIIIIIIIIIIIIIII
5
5.TOP
Â
IIIIIIIIIIIIIIIIIIIII
10
6.BOTTOM
IIIIIIIIIIIIIIIIIIIII
Â
105
7.LEFT
Â
IIIIIIIIIIIIIIIIIIIII
10
8.RIGHT
IIIIIIIIIIIIIIIIIIIII
Â
160
9. RETURN
To Next Page
Loading...
