Samsung SCV-3081 - SSDR; WDR Settings

English_23
● SETUP
C
of
at
y
MASK COLOR/TONE :
Change the color / brightness of the masking area. (Black, Red, Blue, Cyan, Magenta)
TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
OFF : Not being used
SSDR (Samsung Super Dynamic Range) :
SSDR illuminates darker areas of an
image while retaining the same light level
for brighter areas to even out the overall
brightness of images with high contrast
between bright and dark areas.
Use the Function Setup switch to
change the SSDR level in the sub menu
according to the contrast between bright
and dark areas.
WDR : When there are both bright
and dark areas at the same time, this
mode makes both areas distinctive.
Select 'WDR' to adjust the WDR
LIMIT and LEVEL.
- LIMIT : Adjust the WDR Sensitivity by
selecting LOW, MIDDLE or
HIGH.
- LEVEL : Adjust the WDR Brightness by controlling the bar from 1 to 10.
- MODE : Indoor and outdoor backlight conditions are appropriately selected.
- ANTI ROLLING : Rolling caused around a fluorescent lamp is improved.
-
-
y
y
y
SSDR OFF
SSDR ON
WDR SETUP
君 1.LIMIT
MIDDLE
2.LEVEL
IIIIIIIIIII
Â
IIIIIIIIII
5
3.MODE INDOOR
4.ANTI ROLLING OFF
5. RETURN
SSDR SETUP
君 LEVEL
IIIIIIIII
Â
IIIIIIIIIIII
8
Press SET to Return