34_ camera operation
camera operation
- If random objects obstruct the view of each other
- If more than one objects merge or one object divides into multiple objects
- If an object moves too fast (the same object should have overlapping areas between the
consecutive frames)
- If there are reflections/blurs/shadows created by a strong light such as direct sunlight,
lights, and headlights.
- Severe snow, rain and wind. Sunset or sunrise
- If the size is greater than the max size or smaller than the min size, motion is not detected.
To avoid false detection caused by noises, set the max/min detection size suitable for the
installation environment.
But the same movement in the same location can cause a different detection size. So,
include margins when you set the min/max detection size.
Select a desired EXIT mode using the Function Setup switch depending on the
camera purpose.
Save the current settings and exit the MAIN SETUP menu.
Do not save the current settings and exit the MAIN SETUP menu.
Revert camera to factory settings. (The language, communication and
lens settings will remain the same).
To Next Page
Loading...
