G
ETTING
S
TARTED
2.13
2
If you want to use a parallel printer cable, purchase only an
IEEE-1284 compliant parallel cable and connect it to the
parallel connector on your machine.
Push the metal clips down to fit inside the notches on the
cable plug.
N
OTES
:
• You only need to connect one of the cables mentioned above. Do
not use the parallel and the USB cables at the same time.
• If you are using a USB cable, you must be running Windows 98/
Me/2000/XP, or Machintosh with OS 10.1~10.3 (SCX-4520S/
4720FS only).
• The parallel port may not be available depending on your
country.
To the parallel port on your computer
To Next Page
Loading...
