Why is my Samsung SCX-4300 printing so slow?
If your Samsung All in One Printer is printing extremely slowly, the job may be very complex. Reduce the complexity of the page or try adjusting the print quality settings.
What to do for 'Toner Low' message on Samsung All in One Printer?
When you see a 'Toner Low' message on your Samsung All in One Printer, take out the toner cartridge and gently shake it. By doing this, you can temporarily reestablish printing operations.
What does 'Jam 1 or Install Toner' mean on Samsung All in One Printer?
The message 'Jam 1 or Install Toner' on your Samsung All in One Printer means: * Install the Samsung genuine toner cartridge designed for your machine. Otherwise reinstall toner cartridge at several times. * Clean the paper jam.
How to fix 'Invalid Toner' error on Samsung SCX-4300?
If you receive an 'Invalid Toner' error on your Samsung All in One Printer, you must use a Samsung approved cartridge.
Why is the scanner not working on my Samsung SCX-4300 All in One Printer?
Here are some possible reasons why the scanner on your Samsung All in One Printer might not be working: * Make sure that you place the document to be scanned face down on the document glass. * There may not be enough available memory to hold the document you want to scan. Try the Prescan function to see if that works. Try lowering the scan resolution rate. * Check that the USB cable is connected properly. * Make sure that the USB cable is not defective. Switch the cable with a known good cable. If necessary, replace the cable.
Why is my Samsung All in One Printer not printing?
There are several reasons why your Samsung All in One Printer might not be printing: * The machine is not receiving power. Check the power cord connections, power switch, and power source. * The machine is not selected as the default printer. Select Samsung SCX-4300 Series as your default printer in your Windows. * The front cover is not closed. Close the front cover. * Paper is jammed. Clear the paper jam. * No paper is loaded. Load paper. * The toner cartridge is not installed. Install the toner cartridge. * The connection cable between the computer and the machine is not connected properly. Disconnect the printer cable and reconnect it. * The connection cable between the computer and the machine is defective. If possible, attach the cable to another computer that is wor...
How to fix Open Heat Error on Samsung All in One Printer?
To fix an Open Heat Error on your Samsung All in One Printer, unplug the power cord and plug it back in. If the problem persists, please call for service.
What to do if my Samsung All in One Printer is overheating?
If your Samsung All in One Printer is overheating, unplug the power cord and plug it back in. If the problem persists, please call for service.
What happens to my print job after a power failure on Samsung SCX-4300 All in One Printer?
After a power failure, the job you were trying to do before the power failure must be completely re-done.
Why does my Samsung All in One Printer use the wrong paper source?
If your Samsung All in One Printer selects print materials from the wrong paper source, the paper source selection in the printer properties may be incorrect. Select the correct paper source.
Explains safety symbols and general safety precautions for operating the machine.
Provides step-by-step instructions for initial setup and configuration of the printer.
Instructions for correctly installing the toner cartridge into the printer.
Basic steps for performing a copy job using the control panel.
Overview of the Smart Panel software for monitoring and customizing printer settings.
Utilizes the SmarThru software for scanning documents and images.
Step-by-step guides for installing and removing the Linux printer and scanner driver.
Steps for printing documents from Linux applications using CUPS.
Installing printer drivers and Twain driver from the CD-ROM for Macintosh.
Covers installing, uninstalling, and managing the printer driver on Macintosh.
Guides on connecting and configuring the printer for network or USB on Macintosh.
Basic steps and options for printing documents from Macintosh applications.
Instructions for scanning documents using Image Capture on Macintosh.
Step-by-step instructions for locating and removing paper jams from various areas.
Provides meanings and suggested solutions for messages shown on the display.
Lists common issues like paper feeding and printing problems with suggested solutions.
General| Print technology | Laser |
|---|---|
| Maximum resolution | 600 x 600 DPI |
| Time to first page (black, normal) | 11 s |
| Print speed (black, normal quality, A4/US Letter) | 18 ppm |
| Maximum scan resolution | 4800 x 4800 DPI |
| Copy speed (black, normal quality, A4) | 18 cpm |
| Total input capacity | 250 sheets |
| Total output capacity | 50 sheets |
| Display | LCD |
| Built-in display | Yes |
| Market positioning | Home & office |
| Internal memory | 8 MB |
| Sound pressure level (printing) | 53 dB |
| Maximum print size | 216 x 356 mm |
| Paper tray media types | Bond paper, Card stock, Envelopes, Labels, Plain paper |
| Maximum ISO A-series paper size | A4 |
| Dimensions (WxDxH) | 406 x 375 x 231 mm |
| All-in-one functions | Copy, Scan |
| Compatible operating systems | Windows 2000/ XP/ 2003 Server/ Vista Linux OS Mac OS X 10.3 - 10.5 |
| Standard interfaces | USB 2.0 |
| Maximum duty cycle | 10000 pages per month |
Weight and Dimensions| Weight | 9650 g |
|---|
To Next Page
