Samsung SCX-4100 User Manual

SAMSUNG
®
SCX-4100
TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
SAMSUNG SCX-4100 TONER CARTRIDGE
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.uninetimaging.com

Samsung SCX-4100 Specifications

General

Print Technology	Laser
Print Resolution	600 x 600 dpi
Scan Type	Flatbed
Paper Capacity	250 sheets
Connectivity	USB 2.0
Functions	Print, Scan, Copy
Memory	8 MB
Print Speed	14 ppm
Operating System Compatibility	Windows, Mac
Scan Resolution	4800 x 4800 dpi

Summary

Samsung SCX-4100 Toner Cartridge Remanufacturing

Initial Cartridge Disassembly Steps

Instructions for initial disassembly including removing screws, tabs, cover, and extension handle.

End Cap and Drum Removal

Procedures for removing end caps, gearless side screws, and the main drum.

PCR and Gearside End Cap Removal

Steps to remove the PCR and the gearside end cap using indicated screws.

Doctor Blade Replacement Preparation

Instructions on detaching the foam seal and lifting the doctor blade for removal.

Gear and Roller Support Plate Removal

Steps for removing gears and the roller support plate by releasing clips.

Developer Roller Removal

Procedure to remove the support plate and the developer roller.

Doctor Blade Installation and Foam Seal Bonding

Instructions for installing the doctor blade and bonding the foam seal with adhesive.

Final Cartridge Assembly and Toner Refill

Steps for completing cartridge assembly and refilling toner before installing the top cover.