15. Now we are ready to remove the gears. 16. Remove all gears as shown.
17. Gears removed. 18. Remove the roller support plate by releasing the first clip
located under the developer roller axle.
SAMSUNG SCX-4100 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.uninetimaging.com
To Next Page
Loading...
