Samsung SDC-30 - Disassembly and Reassembly; 4-1 Cabinet and PCB Disassembly Procedures

Samsung Electronics 4-1
4. Disassembly and Reassembly
4-1 Cabinet and PCB
Disassemble in the order shown.
(Reassemble in reverse order.)
4-1-1 Case-Side Removal
Disconnect 2 tabs while lifting 
up the case-side to the arrow direction.
Remove 2 screws.
Precision screw Driver
<BOTTOM SIDE>
Bottom Side
Lift up the case-side using the precision screw driver.
3
1
2
Fig. 1