Samsung SDC-30 - Page 24

Disassembly and Reassembly
Samsung Electronics 4-3
4-1-4 Main-PCB Removal
Remove 2 screws.
Disassemble MAIN PCB while 
disconnecting CN301 from FUNCTION-PCB.
Disconnect the lead connector 
CN502 from JACK-PCB.
3
2
1
4-1-5 Jack-PCB Removal
Disconnect the lead 
connector from CN501.
Remove 1 screw.
Disconnect 1 tabs.
1
3
2
Fig. 4
Fig. 5