Alignment and Adjustments
5-4 Samsung Electronics
Communication port setting
Communication rate setting
Adjustment setting
OK button
Fig. 5-7 Option window setting
: Select the communication port connected with PC
: Select the communication rate between DSC and PC.
Generally 56000 is used If an error occurs during communication,
reduce the communication rate (9600 is minimum communication rate,
and 115200 is maximum).
: Test decision : Use the camera disconnection function, or change the
internal adjustment value. (Refer to Fig. 5-9)
: When the above items are set, select 'OK' and complete the adjustment
preparation.
2) Follow this procedure when setting the options in Fig. 5-6.
3). Adjustment execution
1) SEE Fig. 5-6. Press O.K. The screen will appear as in Fig. 5-3.
2) Select 'Start' of SVC menu to display the window shown in Fig. 5-8.
Port number of PC connected
with DSC
* Display screen on testing
* Display the results for test
Progress bar to display the
process state
Pictures taken
Exit
Test/Adjustment start button
Fig. 5-8 Execution window of test/adjustment
To Next Page
Loading...
