Alignment and Adjustments
Samsung Electronics 5-7
LCD test
Mode test
Timer test
Shot and Display
Power interrupt
: Check each segment of camera LCD screen. Press 'Enter' key
to stop and enter the next step.
: Test the a into shot mode. The camera has two types
of shot functions: VGA(640*480) and QVGA(320*240). Test both of these
mode conversions.
: Check the delay shot On/Off of camera. Display the result by means of self
On/Off without special operation.
: Display the thumbnail after the shot to determine normal or abnormal
operation.
: Shut off the camera’s power supply after completion of all tests.
Proceed to the adjustment step.
Fig. 5-13
Fig. 5-14 V-Sub voltage
To Next Page
Loading...
