Forbestcableconnectiontothisproduct,besuretousecableswithamaximumthicknessasbelow:
_ i • Maximumthickness-0.55inches
(14mm)
input Cables (Sold Separately)
i ,,n m v
The product color and shape may vary depending on the model.
3D Emitter --
Woofer
Speakers
F
Power indicator
Remotecontrol sensor
Speakers
I f
1 I
To control the TV using the LED touch pad, tap the LED touch pad centered underneath the stand. The touch pad will
slide out by itself. The LED touch pad will slide back in if unused for a specified period of time.
3D Emitter
Power Indicator
Remote control eenso-
SOURCEE_
MENU rrrl
--VOL+
VCHA
The LED on the 3D emitter blinks only when sending a 3D signal.
Blinks and turns off when the power is on and lights up in standby mode.
Aim the remote control towards this spot on the TV.
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTERE_ button on the remote control.
Displays an on-screen menu, the OSD (on screen display) of your TV's features.
Adjusts the volume. Inthe OSD, use the --VOL+ buttons as you would use the
and !_ buttons on the remote control.
Changes the channels. In the OSD, use the V CH A buttons as you would use the
T and A buttons on the remote control.
(b (Power) Turns the TV on or off.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
English 5
To Next Page
Loading...
