Samsung SGH-E380 - Page 67

64
Menu functions
Account settings : configure e-mail accounts
using different e-mail servers. Press < Create >, or
press < Options > and select Create , if one has
already been saved.
- In use : select this option to use the account and
to display the account in Email inbox .
- Account name : enter a name for the currently
selected account.
To access the following options, press < Options >
and select Next , or press [ ].
- User name : enter a user name.
- Email address : enter your e-mail address.
- Reply address : enter your e-mil address to be
used when the recipient sends a reply.
To access the following options, press < Options >
and select Next , or press [ ].
- SMTP server : enter the IP address or host name
of the outgoing e-mail server.
- SMTP port : enter the SMTP port number.
- SMTP user ID : enter the SMTP user name.
- SMTP password : enter the SMTP password.
- Retrieve server type : select the protocol for
the incoming e-mail server. The remaining
options depend on the protocol type setting.
When the protocol type is POP3 :
- POP3 server : enter the IP address or host name
of the server that receives your e-mail.
- POP3 port : enter the POP3 port number.
- Same ID and password : select if you want to
have the same user ID and password with the
outgoing e-mail server.
- POP3 user ID : enter the POP3 user name.
- POP3 password : enter the POP3 password.
- APOP login : connect to the server by using the
APOP login scheme when this option is selected.
When the protocol type is IMAP4 :
- IMAP4 server : enter the IP address or host
name of the server that receives your e-mail.
- IMAP4 port : enter the IMAP4 port number.
- Same ID and password : select if you want to
have the same user ID and password with the
outgoing e-mail server.