Call functions
28
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <
Options
> and select
Swap
to switch
between the calls.
3. Press <
Options
> and select
End
held
call
to end the call on hold.
4. To end the current call, press [ ].
Using In-call options
Press <
Options
> to access the following
options during a call:
•
Speaker on
/
Normal
: turn on the
speakerphone feature or switch back to
Normal mode.
•
Voice clarity on
/
Voice clarity off
: remove
extraneous noise and increases call quality
so that the person with whom you are
speaking can hear you clearly event if you
are in a noisy place.
•
Hold
/
Retrieve
: place the current call on
hold, or retrieve the call.
•
Swap
: switch between the current call and a
call on hold during a multi-party call.
•
Join
: set up a multi-party call by adding a
caller on hold to a currently active call. You
can include up to 5 people on a multi-party
call.
•
Split
: have a private conversation with one
multi-party call participant. The other
participants can converse with each other.
After the private conversation, select
Join
to
return both private participant to the
multi-party call.
•
Mute
/
Unmute
: switch off the phone's
microphone so that the other person on the
phone cannot hear you, or switch it back on.
To Next Page
Loading...
