Disassembly and Reassembly
3-5Samsung Electronics
No Parts Procedure Remark
3
4
Heat
Exchanger
Compressor
3) Remove the nut flange. (Turn to the right to
remove, as it is a left hand screw)
4) Separate the fan.
5) Loosen 4 fixing screws to separate
the motor.
6) Loosen 4 fixing screws and separate the
motor bracket from the base.
1) Do "1","2", above.
2) Loosen 2 fixing screws of left and right side.
3) Disassemble the inlet and outlet pipe by
welding.
4) Separate the heat exchanger.
1) Do "1","2","3", above.
2) Open the terminal cover of compressor and
unscrew the connection terminal.
3) Disassemble the inlet and outlet pipe of
compressor by welding.
4) Loosen 3 fixing bolts of the lower part.
5) Separate the compressor.
DB98_08122A(3)SM_1 2/11/03 4:22 PM Page 2-11
To Next Page
Loading...
