3-1Samsung Electronics
3. Disassembly and Reassembly
3-1 Indoor Unit
Stop operation of the air conditioner and remove the power cord before repairing the unit.
No Parts Procedure Remark
1 Front Grille 1) Stop the air conditioner operation and block
the main power.
2) Separate tape of front panel upper.
3) Slide the lower front grille down, then
disassemble it by pulling it forwards.
4) Open the upper front grille by pulling right
and left sides of the grille.
5) Take the left and right filter out.
6) Loosen one of the right screw and separate
the terminal cover.
7) Separate the thermistor from the front grille.
8) Loosen five fixing screws of front grille.
9) Pull the lower left and right of discharge
softly for the outside cover to be pulled out.
10) In order to disassemble the panel grille,
press, in order, the left, center, and right of
the upper side of the panel grille with the
palm of the hand to remove the hook.
And then disassemble the panel grille.
DB98_08122A(3)SM_1 2/11/03 4:22 PM Page 2-7
To Next Page
Loading...
