Wireless network
126
About the Wakeup on LAN (WOL) feature
•
You cannot use this feature across a firewall or if a security program has
been installed.
•
To turn on the PC with the WOL feature, the PC must have an active
connection to the LAN. Ensure that the indicator light on the PC’s
LAN port is on, which shows that the LAN connection is active.
•
Depending on your PC model, the camera may only be able to wake
the PC.
•
Depending on your PC’s OS or drivers, the names of the WOL setting
menu may vary.
- examples of setting menu names : Enable PME, Wake on LAN etc.
- examples of setting menu values : Enable, Magic packet etc.
Any changes to your PC’s BIOS settings other than the ones described below
may damage your PC. The manufacturer is not responsible for damage caused
by your changing your PC’s BIOS settings.
To Next Page
Loading...
