4-4
Disassembly and Reassembly
No Parts Procedure Remark
2
3
Fan-Motor
Heat Exchanger
1) Loosen Four fixing screw of the Guard-Fan.
2) Remove the nut flange (Turn to the right to
remove, as it is a left hand screw)
3) Separate the fan.
4) Loosen four fixing screws to separate the
motor.
1) Do “1”, above.
2) Loosen three fixing screws of Ass’y-Frame
and Partition.
3) Disassemble the inlet and outlet pipe by
welding.
4) Separate the heat exchanger.
Samsung Electronics
To Next Page
Loading...