Samsung SM-A135F/DS User Manual

Settings
66
Wi-Fi
Activate the Wi-Fi feature to connect to a Wi-Fi network and access the Internet or other
network devices.
Connecting to a Wi-Fi network
1 On the Settings screen, tap Connections
→
Wi-Fi and tap the switch to activate it.
2 Select a network from the Wi-Fi networks list.
Networks with a lock icon require a password.
•
Once the device connects to a Wi-Fi network, the device will reconnect to that
network each time it is available without requiring a password. To prevent the device
from connecting to the network automatically, tap
next to the network and tap
the
Auto reconnect switch to deactivate it.
•
If you cannot connect to a Wi-Fi network properly, restart your device’s Wi-Fi feature
or the wireless router.
Wi-Fi Direct
Wi-Fi Direct connects devices directly via a Wi-Fi network without requiring an access point.
1 On the Settings screen, tap Connections
→
Wi-Fi and tap the switch to activate it.
2 Tap
→
Wi-Fi Direct .
The detected devices are listed.
If the device you want to connect to is not in the list, request that the device turns on its
Wi-Fi Direct feature.
3 Select a device to connect to.
The devices will be connected when the other device accepts the Wi-Fi Direct connection
request.
To end the device connection, select the device to disconnect from the list.

Samsung SM-A135F/DS Specifications

General

Model	SM-A135F/DS
Display Size	6.6 inches
Display Resolution	1080 x 2408 pixels
Display Type	PLS LCD
Processor	Exynos 850
CPU	Octa-core (4x2.0 GHz Cortex-A55 & 4x2.0 GHz Cortex-A55)
RAM	3GB / 4GB / 6GB
Storage	32GB / 64GB / 128GB
Battery Capacity	5000 mAh
Charging	15W wired
Operating System	Android 12, One UI 4.1
SIM	Dual SIM (Nano-SIM, dual stand-by)
Network	GSM / HSPA / LTE
Colors	Black, White, Blue, Peach
Rear Camera	5 MP (ultrawide), 2 MP (macro)
Front Camera	8 MP, f/2.2, (wide)
Dimensions	165.1 x 76.4 x 8.8 mm
Weight	195 g