Samsung SM-J210F - Smart Glow

Applications
66
Smart Glow
Change a colour of the Smart glow to display a priority or usage alerts, battery status, and
other functions.
On the Apps screen, tap
Smart Glow , and tap the switch to activate it.
•
This feature may not be available depending on the region or service provider.
•
The colours of the Smart glow may vary depending on which the function is being
used.
•
You can also add more details like changing the repeat alert mode or activating
display of battery charging status. Tap
SETTINGS and customise the settings.
Setting priority alerts
Tap Priority alerts and tap the switch to activate it.
To set the priority alerts for the Smart glow, tap and hold a favourite contact or application to
the ring for alerts in that specific colour.
If you want to select other contact or application, you can tap the ring for alerts, and then
select it.
Tap
EDIT to change the colour of the Smart glow or delete the selected contact or
application.
The colours in priority alerts may not match with the actual colours shown on the
Smart glow.
Setting usage alerts
Tap Usage alerts and tap the switch to activate it.
To set the usage alerts for low battery, data, and storage, select an each category icon. Drag
the adjustment bar upwards or downwards to set the usage alert limit or level. The colour of
Smart glow changes red at preset limit or level.
If the battery power gets 15% or below, the Smart glow will only be used for low
battery power alerts.
Using selfie assist
Tap Selfie assist , and position the device so the rear camera is aimed at your face. When the
face is detected, the device beeps and the colour of the Smart glow changes blue. Then, the
device automatically takes the photo after 2 seconds.