Samsung SM-J327W - Lock Screen Security

Basics
27
Lock screen
Pressing the Power key turns off the screen and locks it. Also, the screen turns off and
automatically locks if the device is not used for a specified period.
The screen is locked with Swipe , the default screen lock method.
Press the Power key or the Home key and swipe in any direction to unlock the screen.
To change the screen lock method, on the Apps screen, tap Settings
→
Lock screen and
security
→
Screen lock type , and then select a method.
When you set a pattern, PIN or password for the screen lock method, you can protect your
personal information by preventing others from accessing your device. After setting the
screen lock method, the device will require an unlock code whenever unlocking it.
•
Swipe : Swipe in any direction on the screen to unlock it.
•
Pattern : Draw a pattern with four or more dots to unlock the screen.
•
PIN : Enter a PIN with at least four numbers to unlock the screen.
•
Password : Enter a password with at least four characters, numbers, or symbols to unlock
the screen.
•
None : Do not set a screen lock method.
You can set your device to perform a factory data reset if you enter the unlock code
incorrectly several times in a row and reach the attempt limit. On the Apps screen, tap
Settings
→
Lock screen and security
→
Secure lock settings and tap the
Auto factory reset switch to activate it.