Samsung SM-N910C - Connecting with Other Devices

125
Connecting with other devices
Quick connect
An introduction
Automatically search for nearby devices and quickly connect to them.
•
When connecting to a device that does not support the Quick connect feature,
ensure that Wi-Fi Direct feature is activated.
•
Connection methods may vary depending on the type of connected devices or the
shared content.
Connecting to other devices
When you launch this app for the first time or restart it after performing a data reset, follow
the on-screen instructions to finish the setup.
1
Open the notification panel and tap Quick connect .
When the panel opens, the Wi-Fi feature is activated automatically and the device
searches for nearby devices.
2
Select a device from the list and connect to it by following the on-screen instructions.
The next steps may vary depending on the connected device.
To allow nearby devices to search for your device and connect to it, tap
MORE
→
Set
device visibility
→
Device visibility , and then select an option.