Personalising
69
For better fingerprint recognition
When you scan your fingerprints on the device, be aware of the following conditions that
may affect the feature’s performance:
•
The Home key contains a fingerprint recognition sensor. Ensure that the Home key is not
scratched or damaged by metal objects, such as coins, keys, and necklaces.
•
The screen protector supplied with the device may cause the fingerprint recognition
sensor to malfunction. Remove the screen protector to improve fingerprint sensitivity.
•
Ensure that the fingerprint recognition area and your fingers are clean and dry.
•
The device may not recognise fingerprints that are affected by wrinkles or scars.
•
The device may not recognise fingerprints from small or thin fingers.
•
To improve recognition performance, register fingerprints of the hand used most often to
perform tasks on the device.
•
Do not drag your finger too quickly or slowly. Drag your finger at a moderate speed to
allow the device to recognise it.
•
In dry environments, static electricity can build up in the device. Avoid using this feature
in dry environments or before using the feature, discharge static electricity by touching a
metal object.
Registering fingerprints
If you bend your finger or use a fingertip, the device may not recognise your
fingerprints.
1
On the All apps screen, tap
Settings
→
Finger Scanner
→
Fingerprint manager
.
2
Read the on-screen information and tap
OK
.
3
Place your finger on the fingerprint recognition area at the bottom centre of the screen.
To Next Page
Loading...
