Need help?Do you have a question about the Samsung SM-S901B and is the answer not in the manual?
General| Model | SM-S901B |
|---|---|
| Display Size | 6.1 inches |
| Resolution | 1080 x 2340 pixels |
| Display Type | Dynamic AMOLED 2X |
| RAM | 8GB |
| Storage | 128GB/256GB |
| Rear Camera | 50 MP (wide) + 12 MP (ultrawide) + 10 MP (telephoto) |
| Front Camera | 10 MP |
| Battery Capacity | 3700 mAh |
| Operating System | Android 12, One UI 4.1 |
| Weight | 167 g |
| Build | Glass front (Gorilla Glass Victus+), glass back (Gorilla Glass Victus+), aluminum frame |
| Network | GSM / CDMA / HSPA / EVDO / LTE / 5G |
| Bluetooth | 5.2 |
| Wi-Fi | Wi-Fi 802.11 a/b/g/n/ac/6, dual-band, Wi-Fi Direct, hotspot |
| USB | USB Type-C 3.2 |
| Colors | Phantom Black, White, Pink Gold, Green, Graphite, Sky Blue, Violet, Cream |
| Charging | 25W wired, 15W wireless, 4.5W reverse wireless |
| Sensors | Fingerprint (under display, ultrasonic), accelerometer, gyro, proximity, compass, barometer |
| Protection | Corning Gorilla Glass Victus+ |
| Launch Date | February 2022 |
| Status | Available |
| Processor | Exynos 2200 |
| Dimensions | 146 x 70.6 x 7.6 mm |
| SIM | Nano-SIM and eSIM |
| IP Rating | IP68 dust/water resistant |
General warnings and guidelines for safe and proper device repair procedures.
Guidelines to prevent damage from static electricity during repairs.
Explanation of warning, caution, and notice icons used in the guide.
Steps to update device software wirelessly over-the-air.
Steps to resolve issues if a software update fails.
Instructions for updating device software using a PC application.
Procedures to recover the device from software update failures.
Steps to recover the device by using a different computer.
Guide to reset the device to its original factory default settings.
Use Samsung Members app for post-repair performance evaluation.
Steps to run diagnostic tests on the device's functions.
Test procedure for the SIM card functionality.
Check the device's restart history and status.
Verify the status of the device's official software.
Test for mobile network connectivity and settings.
Test the functionality of various device sensors.
Test the proximity sensor feature.
Test the responsiveness and accuracy of the touch screen.
Check the functionality of the device's physical buttons.
Verify the operation of the device's torch/flashlight.
Test the audio output of the device's speakers.
Check the vibration motor functionality.
Test the functionality of the front and rear cameras.
Test the device's microphone functionality.
Test the accuracy of the device's GPS and location services.
Test the Wi-Fi connectivity and scanning capabilities.
Test the Bluetooth connectivity and scanning capabilities.
Test the fingerprint sensor functionality.
Test the face recognition sensor functionality.
Test the headphone jack and audio output with wired headphones.
Test the S Pen functionality and touchscreen recognition.
Test the device's USB port for data transfer.
Test the device's ability to charge via USB cable.
Test the device's wireless charging capability.
Check battery life, capacity, and overall status.
Table showing calibration requirements for different parts.
Guide to using the Self Repair Assistant app for calibration.
Detailed steps for calibrating the optical fingerprint sensor.
Detailed steps for calibrating the camera range sensor.
Procedure to reset battery cycle count after replacement.
Detailed steps for calibrating the range sensor.
Visual diagram showing internal components and their placement.
List of all parts with their numbers and names.
List of necessary tools and safety equipment for repair.
Details on adhesives and fasteners required for assembly.
General steps for disassembling key device components.
Step-by-step guide to remove the SIM card tray.
Detailed instructions for removing the back cover.
Steps to remove the wireless charging module and speaker.
Steps to remove the charging port assembly.
Steps to remove the main board.
Steps to remove the upper speaker.
Steps to remove the front camera module.
Steps to remove the side and volume buttons.
Information about the bonded display module.
Steps to prepare a new display module for installation.
Steps to reassemble the button module.
Steps to reassemble the front camera module.
Steps to reassemble the upper speaker module.
Steps to reassemble the main board.
Steps to reassemble the charging port module.
Steps to reassemble the wireless charging module and speaker.
Steps to reassemble the back cover.
Steps to reassemble the SIM card tray.
To Next Page