Apps and features
75
Air actions
(Controlling apps remotely with the S Pen)
Control apps remotely by using the S Pen connected to your device via Bluetooth Low
Energy (BLE).
For example, you can quickly launch apps, such as the camera app, by pressing and
holding the S Pen button. Also, while using the camera app, you can take a picture by
pressing the button once. While playing music, you can turn the volume up if you lift the
S Pen up while pressing and holding the S Pen button and turn the volume down if you
lower it.
•
The S Pen must be charged before you can use the Air actions feature. Refer to
Charging the S Pen for more information.
•
When you detach the S Pen from the slot, the icon will appear on the status
bar. If the S Pen is discharged or far from the device, or if there are obstacles or
there is external interference between the S Pen and the device, the S Pen will
be disconnected from the device and the icon will turn grey (
). To use the Air
actions feature again, connect the S Pen with the device by reinserting the S Pen
into the slot.
Taking pictures with the S Pen
Even though you take pictures with your device placing for a distance, you can easily take
pictures by pressing the S Pen button without setting a timer.
1 Launch the
Settings
app, tap
Advanced features
→
S Pen
→
Air actions
, and then tap
the switch to activate the feature.
2 Launch the
Camera
app.
3 Press the S Pen button once to take a picture.
•
To take a series of pictures, press and hold the S Pen button.
•
To change the shooting mode, move the S Pen to the left or right while pressing
and holding the S Pen button.
•
To switch between cameras, press the S Pen button twice.
To Next Page
Loading...
