Disassembly and Assembly
76
Main Board Remove
The PBA can only be replaced at an authorized repair shop. If the PBA is faulty,
contact Samsung for further instruction.
1 Check the screws at the 5 different points of the top speaker and remove them using
a cross-head screwdriver.
When removing the screws, be careful not to damage the camera lens and top
speaker.
Check the number of screws that have been removed, and store them carefully to
make sure that no unassembled screws are left inside the device during assembly.
2 Using the opening pick, disconnect the top FRC cable connector.
To Next Page
Loading...