Samsung SM-T230NU - Watchon

Web & network
53
Pairing with other Bluetooth devices
On the Applications screen, tap Settings
→
Connections
→
Bluetooth
→
Scan , and
detected devices are listed. Select the device you want to pair with, and then accept the auto-
generated passkey on both devices to confirm.
Sending and receiving data
Many applications support data transfer via Bluetooth. An example is Gallery . Open Gallery ,
select an image, tap
→
Bluetooth , and then select one of the Bluetooth devices. After that,
accept the Bluetooth authorisation request on the other device to receive the image.
When another device sends you data, accept the Bluetooth authorization request made by
another device. Received files are saved in the Download folder. If a contact is received, it is
added to the contacts list automatically.
WatchON
Use this application to use your tablet as a remote control for your TV or to watch live TV on
your mobile device.
Tap Samsung
→
WatchON on the Applications screen.
This application may not be available depending on the region or service provider.
You must first connect the device to a network and ensure that the device’s infrared port is
facing the TV.
Initial configuration
Tap Set up WatchON , select a region and broadcast service, and then tap Next .
To connect to a TV, tap
→
Setup , and then follow the on-screen instructions to register the
TV to the device. The steps vary depending on the options you choose.
To connect to other devices, tap
→
Settings
→
Room settings
→
Room 1
→
Add device .
Watching TV
Select from the TV program suggestions or select a category at the bottom of the screen.
Select a TV program and then tap Watch on TV . The selected program will show up on the
connected TV.