Samsung SM-T377T Galaxy TAB E 8.0 - USB Tethering

15
Note: Using your 4G service and Mobile HotSpot
drains your device’s battery. To keep using
the phone as a HotSpot, keep it connected
to a power supply.
To change the Mobile HotSpot password:
1. From the Mobile HotSpot screen, tap Mobile
HotSpot
g
MORE
g
Configure Mobile
HotSpot.
2. Delete the previous password and enter a
new one into the Password field.
3. Tap SAVE to store the new settings.
USB Tethering
Share your device’s mobile data connection via a
direct USB connection between your device and a
single computer.
● If additional software or USB drivers are
required, go to:
samsung.com/us/support/downloads.
● You must have qualifying service on your
account to use this feature.
To connect using USB Tethering:
1. From the Home screen, tap
Apps
g
Settings
g
Mobile HotSpot and
Tethering.
2. Connect the computer to the device using
the USB cable, and then tap USB tethering.
A Tethering or HotSpot active notification
briefly displays.
TMO SM-T377T_Tab E_English_Inbox Guide.indd 15 3/4/2016 3:43:41 PM