Basics
26
Initial setup
When you turn on your device for the first time or after performing a data reset, follow the on-
screen instructions to set up your device.
•
The initial setup procedures may vary depending on the device’s software and the
service provider.
•
To set up your device, you must insert a SIM or USIM card.
1
Turn on the device.
2
Select your preferred device language and select
START
.
Select a language.
3
Select a Wi-Fi network and connect to it.
If you do not connect to a Wi-Fi network, you may not be able to set up some device
features during the initial setup.
4
Follow the on-screen instructions to proceed the initial setup.
To Next Page
Loading...
