Getting Started 10
Getting Started
• Voice Signal/Voice Command.
• English or French Language Menus.
Turning Your Phone On and Off
To turn your phone on:
• Press to turn your phone on.
Once your phone is On, it displays “Looking for Service” which
indicates that your phone is searching for a signal. When your phone
finds a signal, it automatically enters standby mode – the phone’s idle
state. At this point, you are ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of searching,
a Power Save feature is automatically activated. When a signal is
found, your phone automatically returns to standby mode.
In Power Save mode, your phone searches for a signal periodically
without your intervention. You can also initiate a search for service by
pressing any key (when your phone is turned On).
Tip: The Power Save feature helps to conserve your battery power when
you are in an area where there is no signal.
To turn your phone off:
• Press and hold for two seconds until you see the pow-
ering down animation on the display screen.
Your screen remains blank while your phone is off (unless the battery
is charging).
To Next Page
Loading...
