SAMSUNG Proprietary-Contents may change without notice
3. Installation
3-1
This Document can not be used without Samsung's authorization
3-1 Installing and Removing the Battery
To install
, open the battery cover and insert the
battery into the phone. Put on the battery cover.
Make sure the cover on the back are inserted into
the matching slots in the phone. Press down until
the latchsnaps into place.
To remove
, make sure the power is off. Push the
battery cover latch release up completely. Pull and
lift the battery away from the phone.
Specifications using TA (Travel Adapter)
Battery Type
Standard Battery
(Li-ion, 800mAh)
Charging < 3 hours
SEC Code
GH43-02101A
To Next Page
Loading...
