28
Call functions
1. In Idle mode, enter the phone number you want to
dial, such as a bank’s teleservice number.
2. Press <
Options
> and select
Hard Pause
or
2sec
Pause
to insert a pause.
•
Hard Pause
: insert a hard pause. Numbers
after the “P” pause will be sent when you press
[
TALK
].
•
2sec Pause
: insert a 2-second pause.
Numbers after the “T” pause will be sent
automatically.
3. Enter a number to be sent after the pause, such as
your account number, PIN, etc.
4. Repeat steps 2 and 3 to add more pauses and
numbers, if necessary.
5. Press [
TALK
] to make a call.
6. After connecting, wait for a prompt from the
system, and then press [
TALK
] at each prompt, if
applicable.
The DTMF tones are sent.
Ending a call
Close the phone or press [
END
].
Answering a call
When you receive an incoming call, the phone rings
and displays the incoming call image.
Press <
Answer
>, [
TALK
], or [ ] to answer the call.
Tips for answering a call
• When
Any Key
is active, you can press any key,
except for <
Ignore
>, [
END
], and [ / ].
p. 68
• When
Flip Open
is active, you can simply open the
phone.
p. 68
• Press <
Ignore
> to reject a call.
• Press [ / ], [
BACK
], or [
END
] to mute the call
ringer.
A920.book Page 28 Wednesday, March 8, 2006 3:22 PM
To Next Page
Loading...
