Sprint Power Vision
Section 3B. Sprint Power Vision 139
Net Guard
When you first connect to the Web, the Net Guard will
appear to confirm that you want to connect. This
feature helps you avoid accidental connections. You
can disable the Net Guard in the future by selecting
Always Auto-Connect when the Net Guard is displayed.
To change your Net Guard settings:
䊳 While in standby mode, select Main Menu > Settings
> More... > Data > Net Guard.
䡲 Select On to activate the Net Guard.
䡲 Select Off to deactivate the Net Guard.
Data Connection Status and Indicators
Your phone displays the current status of your data
connection through indicators at the top of the screen.
The following symbols are used:
Your phone is connected to the high-speed
Sprint Mobile Broadband Network (EVDO).
When the triangles are animated, data is being
transferred (for example, when you are
opening a Web page); when the triangles are
a solid grey, you are connected to the network
but data is not currently being transferred (for
example, when you are viewing a Web page
that is completely open). In either state, you
can receive incoming calls.
Your phone is on and is connected to the
Sprint 1xRTT data network. When the arrows
are animated, data is being transferred (for
example, when you are opening a Web page)
and you cannot receive calls. When the arrows
are a solid gray, you are connected to the
network but data is not currently being
transferred (for example, when you are viewing
a Web page that is completely open), and you
can receive calls.
Note
When enabled, the Net Guard appears only once as
long as you have not turned the phone off and on.
M520_Sprint.book Page 139 Thursday, September 18, 2008 12:34 PM
To Next Page
Loading...
Need help?
General
