Pull out ① part while pressing the
lower end of ⑥ part with the thumb.
Pull out ⑥ part.
Pull out ➄ part.
Pull out ➂ part by tapping the ➃
part on the floor.
Separate ➁ part with the thumb by
pressing its locking part on one
side.
• At this time, pull it out lightly so as not to dam-
age the ① part
(small rubber packing)
⑥ part
① part
⑥ part.
➄ part.
• At this time, be careful not to damage 2-1
part.(medium rubber packing)
➁ part
2-1 part
Locking
part
➃ part
➂ part
SR-608, 606/ENG 11/15/59 4:19 PM Page 25
To Next Page
Loading...
