Unscrew the cover with a philips-head screwdriver.
15
REPLACING INTERIOR LIGHTS
Always unplug the appliance when replacing the refrigerator light. Otherwise, there is the danger of
electric shock.
- Incandescent light
• Turn the interior light to pull it out and replace it with a new one.
• Watt and voltage must agree with the details on the type plate.
Screw the cover back with a philips-head screwdriver.
INDOOR LAMP IN THE REFRIGERATOR
Raise the hanging sill under the indoor lamp cover upward by
pressing on it.
Replace the indoor lamp with a new lamp after removing it by turning
it in the direction of arrow.
• Watt and voltage must agree with the details on the type plate.
Insert the lower hanging sill after fitting the upper part of the indoor
lamp cover.
INDOOR LAMP IN THE FREEZER
W2-PJT(EN) 12/8/01 11:24 AM Page 15
To Next Page
Loading...
