Samsung SR-S20DTC - Disassembly of Cooler Part (Freezer Room); Disassembly of Cooler Part (Refrigerator Room)

J
2-2)
Disassembly
of
Cooler
Part
of
Freezer
Room
a
eee
TY:
12-3)
Disassembly
of
Cooler
Part
of
Refrigerator
Room
_
ME PUA 8 CANS! ATE GARD SEMEL CE ORO EERE I
a a ae ——--—-— os 4
1. Using (-)screwdriver or similar tools, |
disassemble the cover of inside lamp.
1. Using (-)screwdriver or similar tools,
disassemble the cover of inside lamp.
ae
2. Separate cover-sensor B by turning to
2.
Separate
cover-sensor
B
by
turning
to
the
left,
and
disassemble
screw
of
the
left,
and
disassemble
screw
of
cover-sensor
A
using
(+)
screwdriver.
|
h
cover-sensor
A
using
(+)
screwdriver.
“)P
3. After disassembling the housing of C
temperature sensor and inside lamp, °
3. After disassembling the housing of
temperature sensor and inside lamp,
remove the fixed screws (5 spots).
And, pull forward the lower part of
cover-multi with hands.
remove the fixed screws (5 spots).
And, pull forward the lower part of
cover-multi with hands.
4. Deviate the jaw part of deodorizer
cover (left - right) and disassemble it.
4. Grip the upper part of the front cover of
cooler. Pull it carefully in the arrow
direction. Deviate the jaw part of cover
and pull out.
5. Remove the fixed screws (4 spots) of
the front cover of cooler using (+)
screwdriver. Deviate the jaw part of
cover by pulling it carefully in the arrow
direction.
5. Disassemble motor and heater housing
from the wire terminal which is
assembled at the inside of upper side.
6. Disassembie motor and heater
housing from the wire terminal which
is assembled at the inside of upper
side.