Samsung ST100 - Disconnecting the Camera (for Windows XP)

Playback/Editing 93
Transferring files to your computer (for Windows)
Disconnecting the camera (for Windows XP)
The way to disconnect the USB cable for Windows Vista and
Windows 7 is similar.
If the status lamp on your camera is blinking, wait until
1
it stops.
Click
2
on the tool bar at the bottom right of your PC
screen.
Click the pop-up message.
3
Remove the USB cable.
4
The camera may not be removed safely when Intelli-studio is running.
End the program before disconnecting the camera.
Turn on the camera.
5
The computer recognizes the camera automatically. •
If you set the USB option to Select Mode, select Computer from the
pop-up window.
On your computer, select
6
My computer Removable
Disk DCIM 100PHOTO.
Select the files you want and drag or save them to your
7
computer.