Shooting options
49
Using the timer
Pose for your photo while the AF-assist light/timer lamp
5
is blinking.
The AF-assist light/timer lamp will stop blinking just before the
•
camera automatically takes a photo.
The motion timer may not work when:
You are more than 3 m away from the camera.
•
Your movements are too subtle.
•
There is too much light or backlight.
•
The subject is close enough to reflect the AF light.
•
Using the motion timer
In Shooting mode, select
1
.
Press [
2
Shutter].
Stand within 3 m from the camera within 6 seconds after
3
pressing [Shutter].
Make a motion, such as waving your arms, to activate
4
the timer.
The AF-assist light/timer lamp will start to blink rapidly when
•
the camera detects you.
The detection range of
the motion timer
To Next Page
Loading...
