Wireless network/Bluetooth
106
Sending photos via Bluetooth
After sending is complete, select
7
Yes.
The camera and the device are disconnected and the t
Bluetooth feature turns off.
The camera may not search for a specific Bluetooth-enabled device t
and send a photo to it depending on the device type.
If the other device does not have enough memory, the photo may not t
be transferred. Delete some photos to free up some memory and try
sending again.
You cannot connect to several Bluetooth-enabled devices at one time.t
Place the camera and the Bluetooth-enabled device reasonably close t
to one another.
The camera may cause interference with other devices that use or t
produce radio waves.
When there are no photos in the camera memory, you cannot use t
this feature.
You can send photos only to Bluetooth-enabled phones or PDAs that t
support the Object Push Profile (OPP).
Some phones or PDAs may not display photos you sent via Bluetooth.t
To Next Page
Loading...
