Samsung ST1000 - Connecting to a WLAN and Configuring Network Settings; Connecting to a WLAN Automatically

Wireless network/Bluetooth 92
Icon Description
WPS AP
Secured AP
Ad hoc AP
Signal strength
The camera will connect to the WLAN.t
If the selected AP device supports the WPS profile, select t
WPS on the next screen and press the WPS button or enter
a PIN on the AP device. You can configure the WPS setting
to press the WPS button or enter a PIN on to the AP device.
(p. 96)
If the selected AP device requires a password, continue with t
the next step.
Connecting to a WLAN automatically
In Shooting or Playback mode, select
1
N  n .
Select
2
AP Setting.
The camera will search for and display available AP devices.t
Select an AP device.
3
AP Setting
Samsung 1
Samsung 2
Samsung 3
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings and learn how to
enter text.
This camera uses non-harmonised frequencies and is intended for use in all European countries.
The WLAN can be operated indoors in the EU without restriction, but cannot be operated outdoors in France.