User’s Manual 10
Safety Instructions
•
Do not try to move the monitor by pulling on the wire or
the signal cable.
•
This may cause a breakdown, electric shock or a fire due to damage
to the cable.
•
Do not move the monitor right or left by pulling only the
wire or the signal cable.
•
This may cause a breakdown, electric shock or a fire due to damage
to the cable.
•
Never insert anything metallic into the monitor openings.
•
This may cause an electric shock, fire or injury.
•
Keep the monitor away from any magnetic substances.
•
This may cause discoloring or distortion of the image.
Other
To Next Page
Loading...
