User’s Manual 20
Setup
1. Click
Start, Settings, Control Panel
, and then double-click
Display
.
2. In
Display Registration Information
window, click
Settings
Tab and then click
All Display Modes
.
3. Select a mode that you wish to use (
Resolution, Number of colors
and
Vertical frequency
) and then
click
OK
.
4. Click
Apply
button if you see the screen working normally after clicking
Test
. If the screen is not normal,
change to a different mode (lower mode of resolution, colors or frequency).
Note:
If there is no Mode at
All Display Modes
, select the level of resolution and vertical frequency
by referring to the Preset Display Modes in this guide.
To execute X-Window, you need to make the X86Config file, which is a type of system setting file.
1. Press
Enter
at the first and the second screen after executing the
X86Config
file.
2. The third screen is for
setting your mouse
.
3. Set a mouse for your computer.
4. The next screen is for
selecting a keyboard
.
5. Set a Keyboard for your computer.
6. The next screen is for
setting your monitor
.
7. First of all, set a
horizontal frequency
for your monitor. (You can enter the frequency directly.)
8. Set a
vertical frequency
for your monitor. (You can enter the frequency directly.)
9. Enter the
model name of your monitor
. This information will not affect the actual execution of X-Window.
10. You have
finished
setting up your monitor.
11.
Execute
X-Window after setting other requested hardware.
Microsoft
®
Windows
®
NT Operating System
Linux Operating System
To Next Page
Loading...
