Samsung SyncMaster 2220LM - Page 29

10.Monitor driver installation is completed.
Microsoft
®
Windows
®
2000 Operating System
When you can see "Digital Signature Not Found" on your monitor, follow these steps.
1.Choose "
OK
" button on the "
Insert disk
" window.
2.Click the "
Browse
" button on the "
File Needed
" window.
3.Choose A:(D:\Driver) then click the "Open" button and then click "
OK
" button.
How to install
1.Click "
Start
" , "
Setting
" , "
Control Panel
".
2.Double click the "
Display
" Icon.
3.Choose the "
Settings
" tab and then click "
Advanced..
".
4.Choose "
Monitor
".
5.Click "
Driver
" and then click on "
Update Driver..
" then click on the "Next" button.
6.Choose "
Display a list of the known drivers for this device so that I can choose a
specific driver
" then click "
Next
" and then click "
Have disk
".
7.Click the "
Browse
" button then choose A:(D:\Driver).
8.Click the "
Open
" button, then click "
OK
" button.
9.Choose your monitor model and click the "
Next
" button then click "
Next
" button.
10.Click the "
Finish
" button then the "
Close
" button.
If you can see the "
Digital Signature Not Found
" window then click the "
Yes
"button.
And click the "
Finish
" button then the "
Close
" button.
Case1:If the "Properties" button is inactive, it means your monitor is properly configured.
Please stop installation
Case2:
If the "Properties" button is active, click the "Properties" button then follow next steps
continually.
Microsoft
®
Windows
®
Millennium Operating System
1.Click "
Start
" , "
Setting
" , "
Control Panel
".
2.Double click "
Display
" icon.
3.Select the "
Settings
" tab and click "
Advanced Properties
" button.
4.Select the "
Monitor
" tab.
5.Click the "
Change
" button in the "
Monitor Type
" area.
6.Choose "
Specify the location of the driver
".
7.Choose "
Display a list of all the driver in a specific location..
" then click "
Next
" button.
8.Click the "
Have Disk
" button
9.Specify A:\(D:\driver) then click "
OK
" button.
10.Select "
Show all devices
" and choose the monitor that corresponds to the one you
connected to your computer and click "
OK
".
11.Continue choosing "
Close
" button and "
OK
" button until you close the Display Properties
dialogue box.
Microsoft
®
Windows
®
NT Operating System
1.Click
Start
,
Settings
,
Control Panel
, and then double-click
Display
icon.
2.In Display Registration Information window, click Settings Tab and then click
All Display
Modes
.
3.Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency)
and then click
OK
.
4.Click
Apply
button if you see the screen working normally after clicking
Test
. If the screen is
not normal, change to a different mode (lower mode of resolution, colors or frequency).
If there is no Mode at
All Display Modes
, select the level of resolution and vertical
第 11 頁，共 12 頁SAMSUNG SyncMaster Monitor User's Manual
2008/3/4file://D:\Berry\(D-drive)\My poject\三星\2220LM\2220LM CD Manual\2220LM CD Manual\manual\eng\01_htm\03.htm
PDF created with pdfFactory Pro trial version www.pdffactory.com